TX-Square9.6: 9.6 volt rechargeable Transmitter Battery Packs - SQUARE style (the shape that is 4" tall and can stand up on a table). Choose Capacity (700mAh Ni-Cd, 1100mAh NiCd, 1650mAh Ni-MH, 2500mAh Ni-MH, 2700mAh Ni-MH), and choose Wire Leads or specific Connector (SPEKTRUM white, Futaba male, SPEkTRUM-JR-Hitec-Airtronics Z male, Hitec ELCO white, old-style Airtronics, JR female, JST red, etc; $ extra). Net pricing reflects options chosen. These battery packs are manufactured in the U.S.A. by Batteries America..
For SPEkTRUM DX7, DX6, etc. choose the SPEkTRUM 2-pin flat White connector. Replaces original # BP-A, JR-2, JRPB5011, JRPB955,
For an AIRTRONICS RD8000 transmitter, choose the "RD8000 Special" connector. This connector is Polarized (+) on the outside, and (-) in the middle.
If you have AIRTRONICS RD6000 or RDS8000 transmitter, choose the old-style "Airtronics male" connector (black connector with 3 nubs). A square pack with old airtronics male connector also fits in the SR series (SR4, SR4R), the VG400, VG600 (Vanguard series), Championship series, Quasar series.
NEW OPTION: choose to have an extra set of custom Heavy-Gauge Charging Wire Leads built into the battery pack. This is a popular feature with R/C enthusiasts who want the battery more suitably equipped for rapid charging at the field. You can attach your own connector to the Heavy Duty Charging Leads, so if the battery pack needs a quick boost, it can be hooked up directly to a field charger without having to remove it from the transmitter.
Square pack with Futaba J connector fits the following transmitters: 6DA, 6VA, 6NFK, 6YK, 7NFK, 7CAP, 8AUT, 8UHF, 8UHP, 8UI, 8UA, 8UAFS, 8NFK, NT8C, NT8iB, 8UAF, 8UAP, Futaba Super 8, Futaba 10C, Futaba 10C, Futaba 10CAG, Futaba 10CHG, Futaba 10CG, Futaba 9C, Futaba 8C, Futaba 7C, 9VAP, 9VHP, 9ZAP, 9CAF, 9CHF, 9CAP, 9CHP, 9ZAW, 9ZAWS, 9CA-PCM, 9CHF, 9CHPP, 3EGX, conquest 6, skysport 6, etc. Replaces NT8iB, NT8S700B, NT8S600B, etc.
For the ENELOOP 9.6v transmitter batteries, type "EneloopTX9.6v" in the search box for quick access.
The SPEkTRUM-JR 2-pin flat White connector also replaces original battery packs JR-2, JRPB5011, etc. For XP6102, X9303, XP9303, XP9103, XP8103A, XP7202, X378A, XP662, XP9503, older DX6, older DX7, etc.
The HiTEC 2-Pin whitte connector replaces original battery packs # 54114, 58101, 58207, etc. Fits Optic 6, Eclipse, Flash 4 & 5, Focus 2 & 3, Laser 4 & 6, Neon-SS, Prism, Lynx.
NEW OPTION: for the Futaba 9ZAP core assembly, choose Capacity, and choose Futaba 9Z core. This is a square spot-welded assembly with solder tabs on the + and - terminals. You can solder the wires from the cartridge circuit board onto the new battery cluster. This goes inside the Futaba NT-8A battery case. Fits in PCM 1024Z, PCM 1024ZA transmitters.