7.2 volt 700mAh Nickel Cadmium replacement INSERT for Alinco EBP-10N & EBP-20N. This item goes INSIDE the battery housing. Some soldering & re-gluing is required.
|
Replacement Nickel Cadmium insert for Alinco EBP-10 & EBP-10NA.
Note: Your battery pack will need to be dis-assembled, this insert will need to be soldered-connected into place, and the battery housing will then need to be re-assembled.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The EBP-24xhi insert is a 7.2volt 2500mAh LONG LIFE Nickel Metal Hydride insert for ALINCO packs such as EBP-24, EBP-20xh, EBP-20xs, and other 3" tall packs. The battery cells in the EBP-24xhi insert are 2.5" tall.
|
The EBP-24xhi insert is a 7.2volt 2500mAh LONG LIFE Nickel Metal Hydride insert for ALINCO packs such as EBP-24, EBP-20xh, EBP-20xs, and other 3" tall packs. The battery cells in the EBP-24xhi insert are 2.5" tall.
|
Replacement battery insert for Alinco EBP-3N and EBP-9N. Specs: 7.2 volt 600mAH rechargeable Nickel Cadmium. Some Disassembly / Soldering / Reassembly will be required.
|
EBP-3Nih / EBP-9Nih insert - 7.2v 1100mAh Ni-MH insert for ALINCO. Goes inside battery pack.
|
The EBP-5Ni insert is a 9.6 volt 600mAh Ni-Cd insert for ALINCO. Goes inside EBP-5N battery pack.
|
|
|
|
The EBP-8NAZ is a 12 volt 700mAh Ni-Cd insert for ALINCO. Goes inside EBP-8N / EBP-8NA / EBP-8NAZ battery pack.
|
The EBP-5Ni is a replacement battery insert for original ALINCO EBP-5N battery packs. Your battery case needs to be opened up, and this insert goes inside, to replace the old dead cells. You will need to de-solder & re-solder 2 or 3 solder points.
|
The EBP-8NAZ insert is a 12volt 700mAh rechargeable Ni-Cd assembly - replaces the original cluster inside an ALINCO EBP-8N/NAZ battery pack. Some de-soldering & soldering is required to remove the old insert and install this new insert.
|
The EBP-12NAi+ is a 12 volt 1100mAh replacement rechargeable insert to go inside an ALINCO EBP-12N/NA battery pack. This is a high-capacity (LONG-LIFE) insert. Some de-soldering & re-soldering is required on your part to replace/rebuild your battery.
|
The EBP-16NXi is a 7.2 volt 1650mAh Ni-MH replacement insert to go inside ALINCO EBP-16N battery pack. This is a LONG-LIFE insert. You will need to open up your old pack and de-solder & remove the old battery cluster. The new insert fits right in.
|
The EBP-24NSi is a 7.2 volt 1200mAh Ni-Cd replacement insert to go inside your EBP-24N battery pack. Insert is ready to install; you will need to open up your battery case & remove the old insert. This new insert will solder right into place.
|
List Price: $39.00
Your Price: $35.00
You Save: $4.00 (10 %)
The BP-300xi is a 9.6 volt 1100mAh long-life Ni-Cd replacement insert for Azden-Regency battery packs. Goes inside unit; some soldering is required during installation.
|